A EMG Precision 20mm M4 Stylus | 0.7mm Tungsten Carbide Stem | 0.7mm Cylindrical needle | Tungsten Carbide Flat Bottomed Tip | EWL mm

A stylus for use on coordinate measuring machines (CMM) or systems like machine tool probes. Perfect for use with CNC Touch Probes on machine shop machine centres, lathes and inspection & digitising machines.Straight styli are used to detect easily reachable features on the measured surface. Ruby, as the hardest of all stylus tip materials, is the perfect choice for most applications. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

Dimensional Drawing

Specification

[D3] Ball/Tip Diameter=0.7mm

[L1] Total Length=20mm

[L] Effective Working Length (EWL)=mm

[D4 ]Screw Thread Diameter=M4

[2] Stem Material=Tungsten Carbide

Contact Feature Type=Flat Tip Contact

Ball/Tip Material=Tungsten Carbide Flat Bottomed Tip

Type=Cylindrical needle

Equivalent Renishaw Product Code= No Equivalent from Renishaw

Supplied in a plastic storage box.

Other Notes

A probe stylus is a precision, delicate instrument and should be treated with care and consideration to avoid damage.

Check out our Brief Introduction to Probing Styli article (Technical Specifications Included) through the link below under Downloads & Technical Documents...