EMG Pro Edition BT30 APU13 Drill Chuck | 1~13mm Diameter Capacity | 110mm Length.

The BT30-APU series General Type APU Drill Chuck from EMG Pro is unbalanced. EMG Precision's APU Drill Chucks are a good economic choice for general drilling applications and are suitable for use with HSS Drills. They have a 15 micron run-out and require manual tightening with a c-spanner, or by hand.

• BT30 APU13 Drill Chuck.
• ≤15μm Runout
• Tightening by hand and with c-spanner
• Unbalanced.
• Suitable for HSS Drills.

This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.

TECHNICAL Specifications

Surface Finish: Max. Ra0.25. 
Material Hardness: HRC56-62. 
Quality Controls: 100% Positive Release inspection. 
Carburised Depth: >0.8mm. 

≤3μm Runout
Taper: 7/24. 
Standard: JIS MAS403. 
Material: 20CrMnTi

WHAT'S Included?

• x1 EMG Pro APU Drill Chuck Tool Holder.

Pictures illustrated may not represent the exact model you select.