EMG Pro Edition BT40 FMB40Face Mill Arbor CNC Tool Holder | G2.5-30,000rpm | ≤1μm Runout | Ultra Precision | For Milling Spindles.

Features & Design

EMG Pro Tenon Drive Face Mill Arbors with BT40 shank connection. Tenon Drive Face Mill Arbors are for regular face mills with a spigot.

• BT40 Face Mill Arbor
• Tenon Drive Type
• High quality general holders for indexable face mills
• For regular face mills with a spigot

This Tool Holder is Industrial Quality engineering and is balanced to precise specification by a German Haimer machine to G2.5 - 30,000rpm. 

This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.

BT40 FMB Tool Holder Dimensions / BT40 FMB Tool Holder Drawing

TECHNICAL Specifications

Surface Finish: Max. Ra0.25. 
Material Hardness: HRC56-62. 
Quality Controls: 100% Positive Release inspection. 
Carburised Depth: >0.8mm. 
Runout Tolerance: Less than or equal to 1 micron (0.001mm). 
Taper: 7/24. 
Standard: JIS MAS403. 
Material: 20CrMnTi

SAFETY Notice

Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer prior to use. Only qualified, and/or competent persons should use this tool holder.

WHAT'S Included?

• x1 EMG Pro Ultra Precision Tool Holder
• x1 Matching Precision Nut
• x1 Plastic Case

IMPORTANT Note

It is reccomended that this BT Tool Holder is used in conjunction with the BT40 Tool Holder Tightening Fixture in order to ensure that cutting tools are secured safely and correctly. This can be found here... BT 30/40/50 Tool Holder Tightening Fixture - EMG Precision

Pictures illustrated may not represent the exact model you select.