BT50 SDC Pull Back Collet Tool Holder | G2.5 - 30,000rpm | ≤1μm Runout | EMG Pro | Industrial Ultra-Precision | For CNC Spindle Milling Machines & Routers.

EMG Pro Pull Back Collet Chuck with a BT50 shank that comes balanced to G2.5 30,000RPM

• BT50 SDC Pull Back Milling Chuck.
• Balanced to G2.5 30,000RPM
• ≤1μm Runout

This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.

BT50 SDC Tool Holder Dimensions / BT50 SDC Tool Holder Drawing

TECHNICAL Specifications

Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
Runout Tolerance: Less than or equal to 10 microns (0.01mm).
Taper: 7/24.
Standard: JIS MAS403.
Material: 20CrMnTi.

SAFETY Notice

Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer prior to use. Only qualified, and/or competent persons should use this tool holder.

WHAT'S Included?

• x1 EMG Precision CNC Tool Holder.
  x1 Plastic Storage Case.

IMPORTANT Note

It is reccomended that this BT Tool Holder is used in conjunction with the BT30 Tool Holder Tightening Fixture in order to ensure that cutting tools are secured safely and correctly. This can be found here... BT 30/40/50 Tool Holder Tightening Fixture - EMG Precision

Pictures illustrated may not represent the exact model you select.