EMG Sprite10 Tool Setter for CNC Machining Centers
About our Tool Setter for CNC Machining Centers.. The world-class, state-of-the-art EMG Sprite 10 LTS features an optical trigger switch that offers a…
100% SSL Secure Connection
About our Tool Setter for CNC Machining Centers..
The world-class, state-of-the-art EMG Sprite 10 LTS features an optical trigger switch that offers a repeatability accuracy of 500 nanometers, or 0.5 microns.
The Sprite10 is technically an OTS & and LTS Tool Setter that uses an optical switch to perform a Length Tool Setting function. The Sprite10 transfers the signals by cable and features 5mm of travel with a built in overtravel protection safety circuit. This tool setter has an indicator light to show its operational status and utilises a 6 core cable.
The EMG Sprite10 adopts original micro resistance technology guaranteeing excellent durability for a pro-longed life and is IP68 Rated. The Sprite10 is an industrial micro tool setter for cnc machining centers, particularly where micro and needle cutting tools are used, or the cnc machine space is limited so a compact solution is preferable.
The INVICTUS Series in detail
The Invictus Series of Tool Setters for CNC machining centers are not solely designed to measure tools. Broken tools can prove extremely costly to machine shops if they are not spotted in time to prevent further damage to tools, components or simply increased downtime. The costs involved in tool breakage can be minimised with a tool setter for cnc by incorporating tool breakage checks into an automated routine, through the use of cnc controller macro programming. Machining accuracy and surface finish quality can be improved dramatically with the regular use of a tool setter in your process steps. Tool wear has an effect on these customer valued factors and if steps are not taken to compensate for this quality from part to part, batch to batch can vary significantly.
By using a cnc tool setter regularly in your machining processs, it can also be programmed to adjust for cutter tool wear. Often referred to as cutter compensation, the process involves taking measurements of cutting tools at pre-defined intervals to make adjustments in the CAM program to adjust for tool diameter or height wear. In addition to all these functions, it is also possible with calibrated tool holders, to use a touch off setter to make checks or adjustments for thermal variation compensation.
#Low profile perfect for machining centers with a shallow z axis travel.
# CNC height setter / Z touch off length measurement / cnc machine tool setter.
# Optical Trigger switch removes mechanical wear and tear.
# Overall Height = 43mm (Base to Touch Plate)
# Nano Precision <0.5 micron repeatability, or 500 nanometers*.
# Air Knife Built-in.
# Broken Tool Detection possible.
# Automatic Tool Compensation possible.
# IP68 PROTECTION level
# Excellent DURABILITY with over 10 million trigger times
# CLEAR Operational Indicator Light
#10~30V Input Voltage
|Contact trigger direction||+Z|
|Output||A: PNP NC (Normally Closed) or NPN NO (normally open)|
|Trigger protection stroke||2.7mm|
|Repeat positioning accuracy (2σ)||<1um (probe: 50mm, speed: 50~200mm/min)|
|Trigger life||>10 million times|
|Signal transmission method||Cable 3m oil resistance 4-core φ4.8|
|Contact force||1.3N (installation state: vertical)|
|Contact material||Cemented carbide|
|Surface processing||Grind 4S|
|Contact rating||DC24V 20mA (MAX) recommended value 10mA) resistance load|
|Protective tube||1.5m minimum bending radius R7|
|Pneumatic Connector||4mm OD Pipe, 5/32 Thread.|
|LED light||Flash On/Off, Off/On indicates contact.|
Please note, if you require a precision calibration tool adding to your order it maybe delivered in separate packages to your Tool Setter dependant on which Tool Holder type you require and our inventory.
Sprite10 Tool Setter FAQ - Frequently Asked Questions
Where countries do you deliver the Sprite10 CNC Tool Setter to?
We provide a world-wide delivery service for all of our products. Our main customers are all over Europe, Australia, Asia, Canada, United States of America and South America. Basically if your country does not have any import restrictions we will probably be able to ship to you.
Customer Reviews 2 Reviews Write a Review Hide Reviews Show Reviews
Incredible piece of engineering for something so little. I imagine this would fit on any cnc router where height is limited.
Great piece of kit. Bought this for my mini mill. Really well made for something so small. The build quality is really good. Too precise for what i need but i loved the look of it and didn't want a fleabay special.
Customers Also Viewed