EMG Pro
OLI CNC
ISO20 ER16MS Collet Chuck Tool Holder | G2.5 - 30,000rpm | =5µm 35mm Gauge Length
OLI CNC ISO20 ER16MS Collet CNC Tool Holder | G2.5-30,000rpm | ≤5μm Runout | Ultra Precision | For Milling Spindles. This Tool Holder is Industr…
100% SSL Secure Connection
OLI CNC ISO20 ER16MS Collet CNC Tool Holder | G2.5-30,000rpm | ≤5μm Runout | Ultra Precision | For Milling Spindles.
This Tool Holder is Industrial Quality engineering and is balanced to precise specification by a German Haimer machine to G2.5 - 30,000rpm.
This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.
ISO20 Tool Holder Dimensions / ISO20 Tool Holder Drawing
TECHNICAL Specifications
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
Runout Tolerance: Less than or equal to 5 micron (0.005mm).
Taper: ISO20.
Standard: ISO.
Material: 20CrMnTi
SAFETY Notice
Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer prior to use. Only qualified, and/or competent persons should use this tool holder.
WHAT'S Included?
- x1 OLICNC High Precision Tool Holder
- x1 Matching Precision Nut
- x1 Plastic Case
IMPORTANT Note
It is reccomended that this ISO Tool Holder is used in conjunction with the ISO Tool Holder Tightening Fixture in order to ensure that cutting tools are secured safely and correctly. This can be found here... ISO 30/40 Tool Holder Tightening Fixture - EMG Precision
Pictures illustrated may not represent the exact model you select.
- Runout Tolerance:
- ≤5μm
- Material:
- 20CrMnTi.
- Standard:
- ISO
- Taper:
- ISO20
- Carburised Depth:
- >0.8mm
- Surface Finish:
- Max. Ra0.25
- Material Hardness:
- HRC56-62.
- Tool Holder Shank Type:
- ISO20
- Tool Holder Size:
- ER16MS
- Balance:
- G2.5 - 30,000rpm
- Gauge Length (mm):
- 35
- Clamping Range (mm):
- 1~10
- Tool Holder Chuck Type:
- ER