EMG Pro
OLI CNC
R8 FMB22 Face Mill Arbor | 22mm Bore Diameter | M12 7/16-20UNF
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 2 and get 2% off
- Buy 3 - 4 and get 3% off
- Buy 5 - 9 and get 5% off
- Buy 10 - 49 and get 10% off
- Buy 50 or above and get 15% off
OLI CNC R8 FMB22 Face Mill Arbor Tool Holder | G2.5-30,000rpm | ≤5μm Runout | Ultra Precision | For Milling Spindles using a Face Mill Cu…
100% SSL Secure Connection
OLI CNC R8 FMB22 Face Mill Arbor Tool Holder | G2.5-30,000rpm | ≤5μm Runout | Ultra Precision | For Milling Spindles using a Face Mill Cutting Tool.
Suitable for 50mm and 63mm Face Mills designed to fit a 22mm Diameter spigot.
This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.
R8 FMB Face Mill Arbor Dimensions /R8 FMB Face Mill Arbor Drawing
TECHNICAL Specifications
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
Taper: R8 7/16-20
Standard: R8
Material: 20CrMnTi
SAFETY Notice
Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer prior to use. Only qualified, and/or competent persons should use this tool holder.
WHAT'S Included?
- x1 OLICNC High Precision Tool Holder
- x1 Matching Bolt
Pictures illustrated may not represent the exact model you select.
- Material:
- 20CrMnTi.
- Standard:
- R8 Bridgeport
- Taper:
- R8
- Carburised Depth:
- >0.8mm
- Surface Finish:
- Max. Ra0.25
- Material Hardness:
- HRC56-62.
- Tool Holder Shank Type:
- R8
- Tool Holder Size:
- FMB22
- Clamping Range (mm):
- 22mm
- Tool Holder Chuck Type:
- FMB
- Product Group:
- Tool Holding
- Product Series:
- Spindle Tool Holders
- Series Range:
- Spindle Tool Holders
- customlabel1:
- M12 or 7/16" Thread