EMG Pro
EMG Pro
BT30 Test Bar With Aluminium Case | 32mm Diameter | 250mm Length =3µm Runout
EMG Pro Edition BT30 Test Bar with Aluminium Case | 32mm Diameter | 250mm Length with Protective Aluminium Storage Case. Features & Design Th…
100% SSL Secure Connection
EMG Pro Edition BT30 Test Bar with Aluminium Case | 32mm Diameter | 250mm Length with Protective Aluminium Storage Case.
Features & Design
The BT30 test bar comes hardened and ground on both the diameter and length. It comes supplied with a protective aluminium storage case. Test bars, also known as Control Pins, are used for checking and setting machine parameters and spindle runout. They can also be used for checking the Z axis height/length.
- BT30 Test Bar/Control Pin
- Supplied with protective aluminium storage case.
- Hardened & ground on both diameter and length
- Manufactured with case hardened steel (0.8mm depth)
- Hardness HRC 60+-2.
- ≤3μm Runout
This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.
TECHNICAL Specifications
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
≤3μm Runout
Taper: 7/24.
Standard: JIS MAS403.
Material: 20CrMnTi
WHAT'S Included?
- x1 EMG Pro Ultra Precision Test Bar supplied in Aluminium Case.
Pictures illustrated may not represent the exact model you select.
- Material:
- 20CrMnTi.
- Standard:
- JIS MAS403
- Taper:
- 7/24
- Carburised Depth:
- >0.8mm
- Surface Finish:
- Max. Ra0.25
- Material Hardness:
- HRC58-62.
- Tool Holder Shank Type:
- BT30
- Tool Holder Size:
- Test Bar D32
- Gauge Length (mm):
- 250
- Tool Holder Type:
- Test
- Runout Tolerance:
- ≤3μm