EMG Pro
EMG Pro
HSK100A SLN25 Side Lock Arbor End Mill Tool Holder | 120mm Gauge Length | G2.5 25,000rpm
EMG Pro HSK100A SLN25 Side Lock End Mill Tool Holder | G2.5 30,000rpm | ≤1μm Runout | EMG Pro | Industrial Ultra-Precision | For CNC Spindle Mil…
100% SSL Secure Connection
EMG Pro HSK100A SLN25 Side Lock End Mill Tool Holder | G2.5 30,000rpm | ≤1μm Runout | EMG Pro | Industrial Ultra-Precision | For CNC Spindle Milling Machines / Professional Vertical Machining Centres
EMG Pro End Mil Holder (Side Lock Arbor End Mill Holder) with a HSK shank. These are designed for use with tools that have a Weldon (flat shank), thus providing better rigidity than ER collet chucks due to the improved protection against tool pull out. They come balanced to G2.5 25000RPM
- HSK SLN End Mill Holder (Side Lock Arbors)
- Balanced to G2.5 25,000RPM
- Excellent rigidity compared to ER Collet Chucks
- Specifically designed for use with tools that have a Weldon (flat) shank
- Excellent protection against tool pull out due to side lock.
- Through Coolant capable.
This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.
HSK100A SLN Tool Holder Dimensions /HSK100A SLN Tool Holder Drawing
View Full Size: HSK100A SLN Side Lock Arbor Dimensions Table & Drawing (opens in new window)
TECHNICAL Specifications
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
Runout Tolerance: ≤1μm micron (0.001mm).
Taper: 1/10.
Standard: DIN69893.
Material: 20CrMnTi.
SAFETY Notice
Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer prior to use. Only qualified, and/or competent persons should use this tool holder.
WHAT'S Included?
- x1 EMG Precision CNC Tool Holder.
x1 Plastic Storage Case.
IMPORTANT Note
It is reccomended that this HSK Tool Holder is used in conjunction with the HSK Tool Holder Tightening Fixture in order to ensure that cutting tools are secured safely and correctly. This can be found here... HSK Tool Holder Fixtures | Tool Holder Accessories | EMG Precision
Pictures illustrated may not represent the exact model you select.
- Runout Tolerance:
- ≤1μm
- Material:
- 20CrMnTi.
- Standard:
- DIN69893
- Taper:
- 1/10
- Carburised Depth:
- >0.8mm
- Surface Finish:
- Max. Ra0.25
- Material Hardness:
- HRC56-62.
- Tool Holder Shank Type:
- HSK100A
- Tool Holder Size:
- SLN25
- Balance:
- 25,000rpm
- Gauge Length (mm):
- 120
- Clamping Range (mm):
- 25
- Tool Holder Chuck Type:
- SLN
- L1 (mm):
- 100
- L2 (mm):
- 74
- L3 (mm):
- 24
- L4 (mm):
- N/A
- D (mm):
- 100
- d (mm):
- 25