EMG Pro
EMG Pro
HSK63A FMB16 Ultra-Precision Face Mill Arbor | 50mm Gauge Length | G2.5 30,000rpm | =1µm Run-out
EMG Pro HSK63A FMB16 Face Mill Arbor Tool Holder | G2.5 - 30,000rpm | ≤1μm Runout | EMG Pro | Industrial Ultra-Precision | For CNC Spindle Milli…
100% SSL Secure Connection
EMG Pro HSK63A FMB16 Face Mill Arbor Tool Holder | G2.5 - 30,000rpm | ≤1μm Runout | EMG Pro | Industrial Ultra-Precision | For CNC Spindle Milling Machines / Professional Vertical Machining Centres
World-Class, Ultra-Precision HSK63A FMB Face Mill Arbor designed for the mounting of face mill type cutting tools.
- Ultra High Performance. 1st Class quality for ultimate precision.
- Balanced to G2.5 30,000RPM
- ≤1μm Runout
This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.
HSK63A FMB Tool Holder Dimensions /HSK63A FMB Tool Holder Drawing
View Full Size: HSK63A FMB Face Mill Arbor Dimensions Table & Drawing (opens in new window)
TECHNICAL Specifications
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
Runout Tolerance: Less than or equal to 1 microns (0.001mm).
Taper: 1/10.
Standard: DIN69893.
Material: 20CrMnTi.
SAFETY Notice
Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer prior to use. Only qualified, and/or competent persons should use this tool holder.
WHAT'S Included?
- x1 EMG Precision CNC Tool Holder.
x1 Plastic Storage Case.
IMPORTANT Note
It is reccomended that this HSK Tool Holder is used in conjunction with the HSK Tool Holder Tightening Fixture in order to ensure that cutting tools are secured safely and correctly. This can be found here... HSK Tool Holder Fixtures | Tool Holder Accessories | EMG Precision
Pictures illustrated may not represent the exact model you select.
- Runout Tolerance:
- ≤1μm
- Material:
- 20CrMnTi.
- Standard:
- DIN69893
- Taper:
- 1/10
- Carburised Depth:
- >0.8mm
- Surface Finish:
- Max. Ra0.25
- Material Hardness:
- HRC56-62.
- Tool Holder Shank Type:
- HSK63A
- Tool Holder Size:
- FMB16
- Balance:
- G2.5 30,000rpm
- Gauge Length (mm):
- 50
- Clamping Range (mm):
- 16
- Tool Holder Chuck Type:
- FMB
- L (mm):
- 99
- L1 (mm):
- 50
- L2 (mm):
- 24
- L3 (mm):
- 17
- d (mm):
- 16
- D (mm):
- 32
- K (mm):
- 3.8
- W (mm):
- 8