OLI CNC R8 FMB27 Face Mill Arbor Tool Holder | For Milling Spindles using a Face Mill Cutting Tool.
Suitable for 80mm Diameter Face Mills designed to fit a 27mm Diameter spigot.
This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.
R8 FMB Face Mill Arbor Dimensions /R8 FMB Face Mill Arbor Drawing
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
Taper: R8 7/16-20
Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer prior to use. Only qualified, and/or competent persons should use this tool holder.
- x1 OLICNC High Precision Tool Holder
- x1 Matching Bolt
Pictures illustrated may not represent the exact model you select.