EMG Pro
EMG Pro
BT40 APU13 Drill Chuck Tool Holder | 1~13mm Dia. | 110mm Gauge Length
EMG Pro Edition BT40 APU13 Drill Chuck | 1~13mm Diameter Capacity | 110mm Length. The BT40-APU series General Type APU Drill Chuck from EMG Pro is unb…
100% SSL Secure Connection
EMG Pro Edition BT40 APU13 Drill Chuck | 1~13mm Diameter Capacity | 110mm Length.
The BT40-APU series General Type APU Drill Chuck from EMG Pro is unbalanced. EMG Precision's APU Drill Chucks are a good economic choice for general drilling applications and are suitable for use with HSS Drills. They have a 15 micron run-out and require manual tightening with a c-spanner, or by hand.
- BT40 APU13 Drill Chuck.
- ≤15μm Runout
- Tightening by hand and with c-spanner
- Unbalanced.
- Suitable for HSS Drills.
This is a highly precise machined component made by enginneer's, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adherred to.
TECHNICAL Specifications
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
≤3μm Runout
Taper: 7/24.
Standard: JIS MAS403.
Material: 20CrMnTi
WHAT'S Included?
- x1 EMG Pro APU Drill Chuck Tool Holder.
Pictures illustrated may not represent the exact model you select.
- Material:
- 20CrMnTi.
- Standard:
- JIS MAS403
- Taper:
- 7/24
- Carburised Depth:
- >0.8mm
- Surface Finish:
- Max. Ra0.25
- Material Hardness:
- HRC58-62.
- Tool Holder Shank Type:
- BT40
- Tool Holder Size:
- APU13
- Gauge Length (mm):
- 110
- Tool Holder Type:
- APU
- Runout Tolerance:
- 0.15mm
- Clamping Range (mm):
- 1~13
- Max Speed (rpm):
- 4,000