EMG Pro
EMG Edge
EDGE U-SL2 Series General Machining Carbide Long Flute End Mill | Square End | 2 Flutes | Ø2-20mm
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 5 - 9 and get 5% off
- Buy 10 or above and get 10% off
UC Series Endmill for Steel General Suitable for application of steel & cast iron (≤48HRC) AICr series coating with high oxidation resistanc…
100% SSL Secure Connection
UC Series Endmill for Steel General
-
- Suitable for application of steel & cast iron (≤48HRC)
- AICr series coating with high oxidation resistance and high adhesion.
- Long life for both dry cutting and wet cutting.
Wide Range of Applicable Materials
-
-
-
-
- Suitable for semi-finishing and fine finishing of general steel, cast iron, stainless steel (up to 48HRC).
-
-
-
Different Milling Operations
-
-
-
-
- Face milling with small ap (depth of cut) and large ae (width of cut). Side milling with large ap (depth of cut) and small ae (width of cut). Shallow slotting (less than 0.5D).
-
-
-
Superior Substrates and Coatings
-
-
-
-
- Ultra-fine grained carbide substrates with excellent hardness. AlCr-based coatings are applied along with Balzers latest KiLA furnace, providing high stability, good resistance to heat and wear.
-
-
-
Unique Cutting Edge Geometry
-
-
-
-
- Optimal geometry ensures the strength and sharpness of cutting edge.
-
-
-
FEATURES
-
-
-
- High hardness, high toughness substrate materials, special angle design, suitable for hardened steel machining.
- Application of steel & cast iron (48-55HRC) general machining
-
-
U-SL2 General Purpose Solid Carbide End Mill
Square End - 2 Flutes - Long Flute
FEATURES & SPECIFICATION
U-SL2 Series | ≤48 HRc | Long Flute | Side Milling | Slot Milling | 35° Helix Angle | 2 Flutes | Square End | AlCrSiN Coating | Steel | Cast Iron |
MATERIAL SUITABILITY
KEY ATTRIBUTES
DIMENSIONAL DRAWINGS
VARIANT DIMENSIONS
Unit: mm
Item | Series Range | EMG SKU Order Code | Ordering Code (MPN) | Profile Type | Mill Dia. (mm) [D] | Length of Cut (mm) [Lc] | Overall Length (mm) [L] | Shank Dia. (mm) [d] | Corner Radius (mm) [r] | Ball Radius (mm) [R] | Chamfer (mm) [C] | Neck Length (mm) [L1] | Neck Diameter (mm) [d2] |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | U-SL2 | XI_EMG_U-SL2-02015 | U-SL2-02015 | A | 2 | 15 | 75 | 4 | - | - | - | - | - |
2 | U-SL2 | XI_EMG_U-SL2-03025 | U-SL2-03025 | A | 3 | 25 | 75 | 4 | - | - | - | - | - |
3 | U-SL2 | XI_EMG_U-SL2-04030 | U-SL2-04030 | B | 4 | 30 | 75 | 4 | - | - | - | - | - |
4 | U-SL2 | XI_EMG_U-SL2-05030 | U-SL2-05030 | A | 5 | 30 | 75 | 6 | - | - | - | - | - |
5 | U-SL2 | XI_EMG_U-SL2-06035 | U-SL2-06035 | B | 6 | 35 | 75 | 6 | - | - | - | - | - |
6 | U-SL2 | XI_EMG_U-SL2-08040 | U-SL2-08040 | B | 8 | 40 | 100 | 8 | - | - | - | - | - |
7 | U-SL2 | XI_EMG_U-SL2-10045 | U-SL2-10045 | B | 10 | 45 | 100 | 10 | - | - | - | - | - |
8 | U-SL2 | XI_EMG_U-SL2-12050 | U-SL2-12050 | B | 12 | 50 | 100 | 12 | - | - | - | - | - |
9 | U-SL2 | XI_EMG_U-SL2-14055 | U-SL2-14055 | B | 14 | 55 | 100 | 14 | - | - | - | - | - |
10 | U-SL2 | XI_EMG_U-SL2-16060 | U-SL2-16060 | B | 16 | 60 | 150 | 16 | - | - | - | - | - |
11 | U-SL2 | XI_EMG_U-SL2-18065 | U-SL2-18065 | B | 18 | 65 | 150 | 18 | - | - | - | - | - |
12 | U-SL2 | XI_EMG_U-SL2-20070 | U-SL2-20070 | B | 20 | 70 | 150 | 20 | - | - | - | - | - |
- Type A: the cutting diameter is smaller than the shank diameter
- Type B: the cutting diameter is equal to the shank diameter
- Milling Cutter Series:
- U
- Series Range:
- U-SL2
- Coating Micro-Hardness (HV):
- 3300
- Friction CoEfficient:
- 0.4
- Max Temperature (°C):
- 1100
- Number Of Flutes:
- 2 Flutes
- Helix Angle (°):
- 35°
- End Profile:
- Square
- Diameter Tolerance (mm):
- <12=0 to -0.02 / ≥12=0 to -0.03
- Coating Thickness (μm):
- TBA
- Coating:
- AlCrSiN
- Subsbrate:
- Carbide
- Special Feature:
- Long Flute
Customer Reviews 0 Reviews Write a Review
What is the EMG Edge U-Series of End Mill?
The EMG Edge U-Series of end mill are a general purpose solid carbide end mill range from EMG Precision. Part of the 'EMG Edge' Series of professional milling cutting tools.
What materials are the EMG Edge U_Series of End Mill milling tools used for?
The U-Series are suitable for semi-finishing and fine finishing of general steel, cast iron and stainless steels up to 48 HRc. Comfortable face milling with a small depth of cut (ap) and a large width of cut (ae). Capable of shallow slotting at less than 0.5D.
What are the special coating features of the EMG U-Series Range of Professional Cutting tools?
Ultra-fie grained carbide substrates provide excellent hardness. AlCr-based coatings are applied along with Balzers latest KiLA furnace, providing high stability, good resistance to heat and wear and tear. The optimal geometry ensires the strength and sharpness of the cutting edge.